Difficulty
Easy
Steps
4
Time Required
3 minutes
Sections
1
- WiFi/ Bluetooth Card
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo IdeaPad 100s-14IBR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
WiFi/ Bluetooth Card
- Remove the eight 4mm PH00 screws.
- Remove the four 2mm PH00 screws.
Remove the eight 4mm PH00 screws.
Remove the four 2mm PH00 screws.
1024
Step 2
- Use the nylon spudger to loosen the back cover from the back of the device.
- You may hear a bit of a snapping sound, but this is normal.
Use the nylon spudger to loosen the back cover from the back of the device.
You may hear a bit of a snapping sound, but this is normal.
Step 3
- For safety reasons, disconnect the wires connecting the battery to the motherboard with the nylon spudger.
For safety reasons, disconnect the wires connecting the battery to the motherboard with the nylon spudger.
Step 4
- Remove the tape and unscrew the single 2mm PH00 screw.
- Pull out the current WiFi/Bluetooth card, unplugging the two wires connected to it.
Remove the tape and unscrew the single 2mm PH00 screw.
Pull out the current WiFi/Bluetooth card, unplugging the two wires connected to it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Bin Feng
Member since: 03/18/2019
256 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
University of Memphis, Team S1-G3, Kim Spring 2019
Member of University of Memphis, Team S1-G3, Kim Spring 2019
UM-KIM-S19S1G3
3 Members
9 Guides authored
