Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackLenovo IdeaPad 100s-14IBR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Be sure to power off and unplug your device before you begin your repair.
- Remove the eight 4mm PH00 screws.
- Remove the four 2mm PH00 screws.
Be sure to power off and unplug your device before you begin your repair.
Remove the eight 4mm PH00 screws.
Remove the four 2mm PH00 screws.
1024
Step 2
- Use the nylon spudger to loosen the back cover from the back of the device.
- You may hear a bit of a snapping sound, but this is normal.
Use the nylon spudger to loosen the back cover from the back of the device.
You may hear a bit of a snapping sound, but this is normal.
Step 3
- Remove six 4mm Phillips #00 screws.
- Pull the battery connector parallel to the motherboard to disconnect the battery from the motherboard.
Remove six 4mm Phillips #00 screws.
Pull the battery connector parallel to the motherboard to disconnect the battery from the motherboard.
Step 4
- Use a nylon spudger to pry the battery up and out of the device.
Use a nylon spudger to pry the battery up and out of the device.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Mohammed Younis
Member since: 03/18/2019
421 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
University of Memphis, Team S1-G3, Kim Spring 2019
Member of University of Memphis, Team S1-G3, Kim Spring 2019
UM-KIM-S19S1G3
3 Members
9 Guides authored
