Difficulty

Moderate

Steps

8

Time Required

                          3 - 5 minutes

Sections

4

  • Stand Base
  • 2 steps
  • Back Cover
  • 3 steps
  • Arm Stand
  • 2 steps
  • EMI Cover
  • 1 step

Flags

0

  • BackLenovo IdeaCentre AIO 510S-23ISU

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Stand Base
  • Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
  • Make sure that the work surface is flat and has nothing sharp on it.

Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

Make sure that the work surface is flat and has nothing sharp on it.

1024

Step 2

  • Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

Step 3

              Back Cover
  • Remove the two screws on the bottom of the computer, one on each side.

Remove the two screws on the bottom of the computer, one on each side.

Step 4

  • Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

Step 5

  • Once it has been separated, lift to remove.

Once it has been separated, lift to remove.

Step 6

              Arm Stand
  • Remove the four screws that secure the arm stand.

Remove the four screws that secure the arm stand.

Step 7

  • Lift up to remove the arm stand.

Lift up to remove the arm stand.

Step 8

              EMI Cover
  • Remove the 5 screws that secure the EMI cover.
  • Remove the cover.

Remove the 5 screws that secure the EMI cover.

Remove the cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Jackson Blake

Member since: 01/22/2018

1,104 Reputation

                                      9 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S16-G3, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S16-G3, Banghart Winter 2018 



                    CPSU-BANGHART-W18S16G3                     


                                            4 Members                     


                                            9 Guides authored