Difficulty
Moderate
Steps
12
Time Required
20 - 25 minutes
Sections
2
- Battery
- 4 steps
- Screen
- 8 steps
Flags
0
BackLenovo G70-80
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Turn off the computer.
- Set the computer upside down with the back facing up.
Turn off the computer.
Set the computer upside down with the back facing up.
1024
Step 2
- Located directly below the bottom plate will be two switches near where the battery is located.
- With the battery facing you, slide the battery switch on the right side of the laptop towards the right.
- To ensure the switch on the right is unlocked, look for a red indicator next to the switch.
Located directly below the bottom plate will be two switches near where the battery is located.
With the battery facing you, slide the battery switch on the right side of the laptop towards the right.
To ensure the switch on the right is unlocked, look for a red indicator next to the switch.
Step 3
- Slide the left battery release switch to the left.
- While holding the switch to the left, lift the battery to remove it from the computer.
Slide the left battery release switch to the left.
While holding the switch to the left, lift the battery to remove it from the computer.
Step 4
- Remove the battery.
Remove the battery.
Step 5
Screen
- Open the laptop to face the screen.
Open the laptop to face the screen.
Step 6
- Use a plastic opening tool to pull the bezel forward and release it from the top of the LCD panel.
- The bezel is the plastic frame around the laptop screen.
Use a plastic opening tool to pull the bezel forward and release it from the top of the LCD panel.
The bezel is the plastic frame around the laptop screen.
Step 7
- After the top part of the bezel is released, use the plastic opening tool to completely remove the bezel.
- If you are having trouble removing the bezel from the LCD panel, pull both sides of the bezel towards you with your hands.
After the top part of the bezel is released, use the plastic opening tool to completely remove the bezel.
If you are having trouble removing the bezel from the LCD panel, pull both sides of the bezel towards you with your hands.
Step 8
- Use a screwdriver to remove the screws that secure the LCD panel to the computer.
- Once the bezel is removed, you will see eight screws around the screen that secure the LCD panel to the computer.
Use a screwdriver to remove the screws that secure the LCD panel to the computer.
Once the bezel is removed, you will see eight screws around the screen that secure the LCD panel to the computer.
Step 9
- Carefully separate the LCD panel from the plastic cover, placing it face down on the keyboard
Carefully separate the LCD panel from the plastic cover, placing it face down on the keyboard
Step 10
- Disconnect the LCD panel from the computer by peeling the connector off.
Disconnect the LCD panel from the computer by peeling the connector off.
Step 11
- With a screwdriver, remove the four screws that mount the LCD panel onto the mounting arms.
- There is one screw on each corner that connects to the mounting arms.
With a screwdriver, remove the four screws that mount the LCD panel onto the mounting arms.
There is one screw on each corner that connects to the mounting arms.
Step 12
- Remove the LCD panel.
Remove the LCD panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Alexis Buford
Member since: 02/28/2017
665 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
Carson-Newman University, Team S1-G2, Sobiech Spring 2017
Member of Carson-Newman University, Team S1-G2, Sobiech Spring 2017
CNU-SOBIECH-S17S1G2
3 Members
5 Guides authored
sidney ifedha - Oct 3, 2017
Reply
how do you repair a whitescreen effect for a lenovo110 ideapad
