Difficulty
Moderate
Steps
8
Time Required
10 - 15 minutes
Sections
2
- Battery
- 3 steps
- Webcam
- 5 steps
Flags
0
BackLenovo G70-70
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Ensure the battery is removed before attempting to fix anything on the laptop.
- Orient the laptop so the bottom side is facing you.
- To unlock the battery, place your thumb over the left switch and slide it to the left.
Ensure the battery is removed before attempting to fix anything on the laptop.
Orient the laptop so the bottom side is facing you.
To unlock the battery, place your thumb over the left switch and slide it to the left.
1024
Step 2
- To access the battery, place your thumb over the right switch and slide it to the right.
- When the battery is unlocked, it will automatically pop up.
To access the battery, place your thumb over the right switch and slide it to the right.
When the battery is unlocked, it will automatically pop up.
Step 3
- Remove the battery by lifting it up and away from yourself.
Remove the battery by lifting it up and away from yourself.
Step 4
Webcam
- Pry open the plastic casing surrounding the screen with the opening tool.
- You will hear loud popping noises as you separate the plastic casing from the screen.
- Pull the plastic casing toward yourself and separate it from the screen.
Pry open the plastic casing surrounding the screen with the opening tool.
You will hear loud popping noises as you separate the plastic casing from the screen.
Pull the plastic casing toward yourself and separate it from the screen.
Step 5
- Pull the plastic casing upward and toward yourself to completely remove it from the laptop.
- Remove eight 4.5 mm screws from the front of the metal casing with a Phillips #0 screwdriver.
- There are three screws on the bottom left and right sides of the screen. There is one screw on the top left and right side of the screen.
Pull the plastic casing upward and toward yourself to completely remove it from the laptop.
Remove eight 4.5 mm screws from the front of the metal casing with a Phillips #0 screwdriver.
There are three screws on the bottom left and right sides of the screen. There is one screw on the top left and right side of the screen.
Step 6
- Lower the screen to separate it from the plastic casing behind it.
- The webcam will be located at the top of the back casing.
Lower the screen to separate it from the plastic casing behind it.
The webcam will be located at the top of the back casing.
Step 7
- Pull the silver flaps down to access the webcam.
- Pull the webcam out of the plastic casing to gain access to its cable.
Pull the silver flaps down to access the webcam.
Pull the webcam out of the plastic casing to gain access to its cable.
Step 8
- Pull the cable down to remove the webcam from the laptop.
Pull the cable down to remove the webcam from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Joseph Crews
Member since: 09/15/2022
815 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
University of Memphis, Team 3-3, Lane Fall 2022
Member of University of Memphis, Team 3-3, Lane Fall 2022
UM-LANE-F22S3G3
3 Members
5 Guides authored
