Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
3
- Battery
- 1 step
- Back Panel
- 1 step
- RAM
- 2 steps
Flags
0
BackLenovo G500s Touch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
If you’re looking to replace the RAM in your device, follow the steps outlined in this guide.
What you need
Step 1
Battery
- Make sure that your device is powered off and unplugged from the power source.
- Flip your device over so that the back is facing you.
- Using your fingers, push the tabs in opposite directions to eject the battery.
- Remove the battery from the device.
Make sure that your device is powered off and unplugged from the power source.
Flip your device over so that the back is facing you.
Using your fingers, push the tabs in opposite directions to eject the battery.
Remove the battery from the device.
1024
Step 2
Back Panel
- Remove the three 4mm screws on the back cover using the Phillips #00 screwdriver.
- Remove the back cover from the device.
Remove the three 4mm screws on the back cover using the Phillips #00 screwdriver.
Remove the back cover from the device.
Step 3
RAM
- Push the silver hinges outwards to eject the RAM sticks.
- Slide the ram out diagonally toward you and remove it from the device.
Push the silver hinges outwards to eject the RAM sticks.
Slide the ram out diagonally toward you and remove it from the device.
Step 4
- Repeat the same instructions from the previous step to remove any extra RAM sticks.
Repeat the same instructions from the previous step to remove any extra RAM sticks.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Christopher Foster
Member since: 09/24/2019
488 Reputation
5 Guides authored
Badges:
9
+6 more badges
