Difficulty

Moderate

Steps

4

Time Required

                          8 minutes

Sections

3

  • Battery
  • 1 step
  • Back Panel
  • 1 step
  • Keyboard
  • 2 steps

Flags

0

  • BackLenovo G500s Touch

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure that your device is powered off and unplugged from the power source.
  • Flip your device over so that the back is facing you.
  • Using your fingers, push the tabs in opposite directions to eject the battery.
  • Remove the battery from the device.

Make sure that your device is powered off and unplugged from the power source.

Flip your device over so that the back is facing you.

Using your fingers, push the tabs in opposite directions to eject the battery.

Remove the battery from the device.

1024

Step 2

              Back Panel
  • Remove the three 4mm screws on the back cover using the Phillips #00 screwdriver.
  • Remove the back cover from the device.

Remove the three 4mm screws on the back cover using the Phillips #00 screwdriver.

Remove the back cover from the device.

Step 3

              Keyboard
  • With the back open, remove the three 6mm screws using the Phillips #00 screwdriver.
  • Remove two more 6mm screws using the same screwdriver.

With the back open, remove the three 6mm screws using the Phillips #00 screwdriver.

Remove two more 6mm screws using the same screwdriver.

Step 4

  • Using a metal spudger, gently pry under the keyboard from one corner.
  • Be careful of the strip connecting your keyboard to the laptop. Place your hand underneath the keyboard and carefully remove it from the laptop.
  • With the keyboard out, flip the lock holding the strip in place.
  • Remove the keyboard from the device.

Using a metal spudger, gently pry under the keyboard from one corner.

Be careful of the strip connecting your keyboard to the laptop. Place your hand underneath the keyboard and carefully remove it from the laptop.

With the keyboard out, flip the lock holding the strip in place.

Remove the keyboard from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Christopher Foster

Member since: 09/24/2019

488 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges