Difficulty

Easy

Steps

8

Time Required

                          10 minutes            

Sections

3

  • Battery
  • 4 steps
  • Bottom Access Panel
  • 2 steps
  • RAM
  • 2 steps

Flags

0

  • BackLenovo G50-80 80

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before beginning, make sure to power the laptop off and remove the laptop from any external power source such as the laptop’s charger.

What you need

Step 1

              Battery               
  • Place laptop on a flat surface with the back cover facing up and the hinges facing you.

Place laptop on a flat surface with the back cover facing up and the hinges facing you.

1024

Step 2

  • Slide the tab positioned on the right side to the right.
  • You will know this has been done correctly when you can see the red surface beneath the tab.

Slide the tab positioned on the right side to the right.

You will know this has been done correctly when you can see the red surface beneath the tab.

Step 3

  • Move the left tab to the left to release the battery.
  • You will hear an audible ‘click’ and see the battery separate from the rest of the laptop.

Move the left tab to the left to release the battery.

You will hear an audible ‘click’ and see the battery separate from the rest of the laptop.

Step 4

  • Hold the battery at the top seam between it and the laptop.
  • Roll the battery towards yourself.
  • Lift the battery out of the laptop.

Hold the battery at the top seam between it and the laptop.

Roll the battery towards yourself.

Lift the battery out of the laptop.

Step 5

              Bottom Access Panel               
  • Remove the three screws securing the outer cover of the laptop using a Phillips #0 screwdriver.

Remove the three screws securing the outer cover of the laptop using a Phillips #0 screwdriver.

Step 6

  • Slide the cover away from the hinges and lift the panel off.

Slide the cover away from the hinges and lift the panel off.

Step 7

              RAM               
  • Use the tweezers to push the two silver clips to the left and right of the RAM chip outwards.
  • The RAM will release after pushing the second clip.

Use the tweezers to push the two silver clips to the left and right of the RAM chip outwards.

The RAM will release after pushing the second clip.

Step 8

  • Use your fingers to carefully remove the RAM chip by sliding it out at a ~45° angle.

Use your fingers to carefully remove the RAM chip by sliding it out at a ~45° angle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Noah Baldwin                     

Member since: 02/08/2022

317 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       University of Kentucky, Team 1-4, Kaufmann Spring 2022                        

                                                  Member of University of Kentucky, Team 1-4, Kaufmann Spring 2022 



                    UKY-KAUFMANN-S22S1G4                     


                                            3 Members                     


                                            3 Guides authored