Difficulty

Moderate

Steps

9

Time Required

                          15 minutes

Sections

3

  • Battery
  • 4 steps
  • Bottom Access Panel
  • 2 steps
  • Hard Drive
  • 3 steps

Flags

0

  • BackLenovo G50-80 80

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Your laptop will need to be turned off and removed from any external power sources such as the laptop’s charger.

What you need

Step 1

              Battery
  • Place laptop on a flat surface with the back cover facing up and the hinges facing you.

Place laptop on a flat surface with the back cover facing up and the hinges facing you.

1024

Step 2

  • Slide the tab positioned on the right side to the right.
  • You will know this has been done correctly when you can see the red surface beneath the tab.

Slide the tab positioned on the right side to the right.

You will know this has been done correctly when you can see the red surface beneath the tab.

Step 3

  • Move the left tab to the left to release the battery.
  • You will hear an audible ‘click’ and see the battery separate from the rest of the laptop.

Move the left tab to the left to release the battery.

You will hear an audible ‘click’ and see the battery separate from the rest of the laptop.

Step 4

  • Hold the battery at the top seam between it and the laptop.
  • Roll the battery towards yourself.
  • Lift the battery out of the laptop.

Hold the battery at the top seam between it and the laptop.

Roll the battery towards yourself.

Lift the battery out of the laptop.

Step 5

              Bottom Access Panel
  • Remove the three screws securing the outer cover of the laptop using a Phillips #0 screwdriver.

Remove the three screws securing the outer cover of the laptop using a Phillips #0 screwdriver.

Step 6

  • Slide the cover away from the hinges and lift the panel off.

Slide the cover away from the hinges and lift the panel off.

Step 7

              Hard Drive
  • Rotate the laptop until you are positioned over the hard drive.

Rotate the laptop until you are positioned over the hard drive.

Step 8

  • Use the #00 Phillips screwdriver to remove the four 5.5mm screws around the hard drive.

Use the #00 Phillips screwdriver to remove the four 5.5mm screws around the hard drive.

Step 9

  • Slide the hard drive towards yourself and remove it.

Slide the hard drive towards yourself and remove it.

If you would like to reassemble your device, please follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Noah Baldwin

Member since: 02/08/2022

317 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of Kentucky, Team 1-4, Kaufmann Spring 2022                        

                                                  Member of University of Kentucky, Team 1-4, Kaufmann Spring 2022 



                    UKY-KAUFMANN-S22S1G4                     


                                            3 Members                     


                                            3 Guides authored