Lenovo G50 70 Ram Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          6 minutes

Sections

Battery
2 steps
Back Access Panel
2 steps
RAM
4 steps

Flags

BackLenovo G50-70
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Push the left switch (labeled 1) to the left to show red underneath. This will unlock battery.
Push the right switch (labeled 2) to the right. This will eject battery.

Push the left switch (labeled 1) to the left to show red underneath. This will unlock battery.

Push the right switch (labeled 2) to the right. This will eject battery.

1024

Step 2

Rotate the battery away from the laptop.

Rotate the battery away from the laptop.

Step 3

              Back Access Panel

Remove the three 6mm Phillips #0 screws holding the back access panel on.

Remove the three 6mm Phillips #0 screws holding the back access panel on.

Step 4

Slide the cover toward you to unlatch it.
The edge of the panel will slide away from the laptop so it can be lifted.

Slide the cover toward you to unlatch it.

The edge of the panel will slide away from the laptop so it can be lifted.

Step 5

RAM

The battery should be disconnected before taking off any internal parts.

The battery should be disconnected before taking off any internal parts.

Step 6

Start by removing top RAM stick held in by two spring clips on either side.
Press both spring clips away from RAM stick simultaneously.

Start by removing top RAM stick held in by two spring clips on either side.

Press both spring clips away from RAM stick simultaneously.

Step 7

When both spring clips are pressed open, RAM stick should pop up. If it doesn’t pop up on its own, you can pull it up. If spring clips are properly removed, you shouldn’t encounter any resistance.
Lift RAM stick away from plug.

When both spring clips are pressed open, RAM stick should pop up. If it doesn’t pop up on its own, you can pull it up. If spring clips are properly removed, you shouldn’t encounter any resistance.

Lift RAM stick away from plug.

Step 8

Lower RAM stick is removed the same way as the first. Pull two spring clips on either side away from RAM stick to release it.
Spring clips on lower RAM stick look slightly different than the clips on upper ram sticks; however, they operate in the same way.

Lower RAM stick is removed the same way as the first. Pull two spring clips on either side away from RAM stick to release it.

Spring clips on lower RAM stick look slightly different than the clips on upper ram sticks; however, they operate in the same way.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 1 other contributor

                    Caleb DesJardins

Member since: 09/24/2018

1,183 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Central Washington University, Team S1-G7, Pengilly Fall 2018                        

                                                  Member of Central Washington University, Team S1-G7, Pengilly Fall 2018 



                    CWU-PENGILLY-F18S1G7                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team