Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

2

  • Battery
  • 3 steps
  • LCD Screen
  • 5 steps

Flags

0

  • BackLenovo G40-30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • At the top of the laptop you will see two switches, like in image one and two.
  • Pull the switches outwards with your thumb, towards the unlocked lock.

At the top of the laptop you will see two switches, like in image one and two.

Pull the switches outwards with your thumb, towards the unlocked lock.

1024

Step 2

  • Once both switches are pulled, the battery should pop out.

Once both switches are pulled, the battery should pop out.

Step 3

  • Now you are ready to insert your new battery.

Now you are ready to insert your new battery.

Step 4

              LCD Screen
  • Use the plastic opening tool to pry the plastic away from the screen.

Use the plastic opening tool to pry the plastic away from the screen.

Step 5

  • Carefully unsnap the front plastic piece to expose the frame of the screen.

Carefully unsnap the front plastic piece to expose the frame of the screen.

Step 6

  • Unscrew the four 7mm screws located on all four corners of the frame using a JIS #0 screwdriver.
  • Carefully lift the screen from the base so as to not damage it.

Unscrew the four 7mm screws located on all four corners of the frame using a JIS #0 screwdriver.

Carefully lift the screen from the base so as to not damage it.

Step 7

  • Slowly remove the sticker connected to the rear of the screen using a spudger.
  • Carefully disconnect the screen from the base of the laptop.

Slowly remove the sticker connected to the rear of the screen using a spudger.

Carefully disconnect the screen from the base of the laptop.

Step 8

  • Now you have removed the screen and are ready to install a new one.

Now you have removed the screen and are ready to install a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jimmy McClenan

Member since: 02/08/2018

156 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Sam Houston State, Team S16-G4, Nardone Spring 2018                        

                                                  Member of Sam Houston State, Team S16-G4, Nardone Spring 2018 



                    SHSU-NARDONE-S18S16G4                     


                                            5 Members                     


                                            5 Guides authored

Nnaemeka Okechukwu - Apr 22, 2020

Reply

Thanks alot…..I just fixed my screen by God’s grace.

Chin Yau Chia - Jun 21, 2022

Reply

Hi! Is it possible to replace the screen with 1080p LCD?