Lenovo G40 30 Keyboard Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 - 20 minutes

Sections

Battery
3 steps
Keyboard
6 steps

Flags

BackLenovo G40-30
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

At the top of the laptop you will see two switches, like in image one and two.
Pull the switches outwards with your thumb, towards the unlocked lock.

At the top of the laptop you will see two switches, like in image one and two.

Pull the switches outwards with your thumb, towards the unlocked lock.

1024

Step 2

Once both switches are pulled, the battery should pop out.

Once both switches are pulled, the battery should pop out.

Step 3

Now you are ready to insert your new battery.

Now you are ready to insert your new battery.

Step 4

              Keyboard

Use a JIS #1 screwdriver to remove the two 7 mm screws.

Use a JIS #1 screwdriver to remove the two 7 mm screws.

Step 5

Remove the back panel by sliding it away from the battery.

Remove the back panel by sliding it away from the battery.

Step 6

Use a JIS #1 screwdriver to remove the three 7 mm screws.

Use a JIS #1 screwdriver to remove the three 7 mm screws.

Step 7

Wedge the plastic opening tool in-between the keyboard and the base of the laptop.
Continue using the plastic opening tool to pry around the edge until the keyboard is completely freed form the frame.
The keyboard should only be connected by a ribbon on the underside of the keyboard.
It is recommended that you slowly pull the keyboard out as your move around the edge. As in picture 2.
Be careful not to pull the keyboard too far away from the face as it will damage the data ribbon.

Wedge the plastic opening tool in-between the keyboard and the base of the laptop.

Continue using the plastic opening tool to pry around the edge until the keyboard is completely freed form the frame.

The keyboard should only be connected by a ribbon on the underside of the keyboard.

It is recommended that you slowly pull the keyboard out as your move around the edge. As in picture 2.

Be careful not to pull the keyboard too far away from the face as it will damage the data ribbon.

Step 8

Use the tweezers to lift the black hinge on the ribbon connector.
Then pull the ribbon from the connector and remove the keyboard from the laptop.

Use the tweezers to lift the black hinge on the ribbon connector.

Then pull the ribbon from the connector and remove the keyboard from the laptop.

Step 9

Now your keyboard is free to be replaced!

Now your keyboard is free to be replaced!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor

                    Luke

Member since: 02/08/2018

314 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Sam Houston State, Team S16-G4, Nardone Spring 2018                        

                                                  Member of Sam Houston State, Team S16-G4, Nardone Spring 2018 



                    SHSU-NARDONE-S18S16G4                     


                                            5 Members                     


                                            5 Guides authored

herman - Jun 8, 2020

thanks ….terimakasih sangat membantu…..

Introduction#

What you need#

Team#

Introduction

What you need

Team