Lenovo Flex 3 1120 Speakers Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Bottom Panel
4 steps
Speakers
4 steps

Flags

BackLenovo Flex 3-1120
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Bottom Panel

Lay the computer down with the bottom panel facing up.

Lay the computer down with the bottom panel facing up.

1024

Step 2

Locate the ten 6mm Phillips screws along the edges and in the center of the back panel.
Remove all ten 6mm Phillips screws with a size 0 Phillips screwdriver.

Locate the ten 6mm Phillips screws along the edges and in the center of the back panel.

Remove all ten 6mm Phillips screws with a size 0 Phillips screwdriver.

Step 3

Wedge the plastic opening tool into the small space under the back panel.
Use the plastic opening tool as a lever to separate the bottom panel from the computer.
Slide the tool along the edges of the computer until the bottom panel is completely separated.
You may start prying the bottom panel on any edge.

Wedge the plastic opening tool into the small space under the back panel.

Use the plastic opening tool as a lever to separate the bottom panel from the computer.

Slide the tool along the edges of the computer until the bottom panel is completely separated.

You may start prying the bottom panel on any edge.

Step 4

Lift the bottom panel off of the computer.

Lift the bottom panel off of the computer.

Step 5

              Speakers

Locate the speakers at the bottom left and right corners of the computer.

Locate the speakers at the bottom left and right corners of the computer.

Step 6

Locate the two 1mm Phillips head screws on both speakers.
Remove both screws from each speaker.

Locate the two 1mm Phillips head screws on both speakers.

Remove both screws from each speaker.

Step 7

Locate where the two speaker wires join at the center of the computer.
Follow the wires directly upward to where they connect into the motherboard.

Locate where the two speaker wires join at the center of the computer.

Follow the wires directly upward to where they connect into the motherboard.

Step 8

Using the spudger, pull the wire down and away from the motherboard to disconnect it.

Using the spudger, pull the wire down and away from the motherboard to disconnect it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Geoff Bentz

Member since: 03/09/2016

934 Reputation

                                      5 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       UMass Dartmouth, Team 7-1, Catania Spring 2016                        

                                                  Member of UMass Dartmouth, Team 7-1, Catania Spring 2016 



                    UMASSD-CATANIA-S16S7G1                     


                                            4 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team