Difficulty
Moderate
Steps
8
Time Required
20 minutes
Sections
3
- Battery
- 3 steps
- Back Panel
- 3 steps
- RAM
- 2 steps
Flags
0
BackLenovo Essential G570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn off the laptop.
- Disconnect the charging cable.
- Failure to unplug the cable could result in electric shock.
- Turn the computer upside down.
Turn off the laptop.
Disconnect the charging cable.
Failure to unplug the cable could result in electric shock.
Turn the computer upside down.
1024
Step 2
- Locate the two switches that lock the battery.
- Push the right switch outwards to unlock the battery.
Locate the two switches that lock the battery.
Push the right switch outwards to unlock the battery.
Step 3
- Push and hold the left switch outwards to unlock the battery.
- Pull the battery away from the computer.
Push and hold the left switch outwards to unlock the battery.
Pull the battery away from the computer.
Step 4
Back Panel
- Turn the laptop over so that the bottom side is facing up.
Turn the laptop over so that the bottom side is facing up.
Step 5
- Unscrew the five 5mm Phillips #0 screws that hold the cover in place.
- The screws do not come out fully from the back plate. They stay attached to the plate itself.
Unscrew the five 5mm Phillips #0 screws that hold the cover in place.
The screws do not come out fully from the back plate. They stay attached to the plate itself.
Step 6
- With the screws removed, insert the plastic opening tool into the groove located on the right side.
- Begin to pry up, and the plate should lift up from the body of the laptop.
- While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.
With the screws removed, insert the plastic opening tool into the groove located on the right side.
Begin to pry up, and the plate should lift up from the body of the laptop.
While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.
Step 7
RAM
- Using your fingers, hold open the two clips holding the top RAM in place.
- The two RAM chips are placed one on top of another. It is important to take the top one out first to easily access the bottom one.
- With the clips held away from the RAM, slide the top stick out from it’s connection.
Using your fingers, hold open the two clips holding the top RAM in place.
The two RAM chips are placed one on top of another. It is important to take the top one out first to easily access the bottom one.
With the clips held away from the RAM, slide the top stick out from it’s connection.
Step 8
- With the top RAM stick removed, repeat the same process for the bottom piece. Begin by holding the two clips away from the RAM.
- With the clips held out, slide the RAM out from the connection.
With the top RAM stick removed, repeat the same process for the bottom piece. Begin by holding the two clips away from the RAM.
With the clips held out, slide the RAM out from the connection.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 1 other contributor
Justin Bickford
Member since: 03/01/2018
443 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team S1-G1, Simcock Spring 2018
Member of UMass Dartmouth, Team S1-G1, Simcock Spring 2018
UMASSD-SIMCOCK-S18S1G1
3 Members
6 Guides authored