Difficulty

Moderate

Steps

9

Time Required

                          10 minutes

Sections

3

  • Battery
  • 3 steps
  • Back Panel
  • 3 steps
  • Fan
  • 3 steps

Flags

0

  • BackLenovo Essential G570

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off the laptop.
  • Disconnect the charging cable.
  • Failure to unplug the cable could result in electric shock.
  • Turn the computer upside down.

Turn off the laptop.

Disconnect the charging cable.

Failure to unplug the cable could result in electric shock.

Turn the computer upside down.

1024

Step 2

  • Locate the two switches that lock the battery.
  • Push the right switch outwards to unlock the battery.

Locate the two switches that lock the battery.

Push the right switch outwards to unlock the battery.

Step 3

  • Push and hold the left switch outwards to unlock the battery.
  • Pull the battery away from the computer.

Push and hold the left switch outwards to unlock the battery.

Pull the battery away from the computer.

Step 4

              Back Panel
  • Turn the laptop over so that the bottom side is facing up.

Turn the laptop over so that the bottom side is facing up.

Step 5

  • Unscrew the five 5mm Phillips #0 screws that hold the cover in place.
  • The screws do not come out fully from the back plate. They stay attached to the plate itself.

Unscrew the five 5mm Phillips #0 screws that hold the cover in place.

The screws do not come out fully from the back plate. They stay attached to the plate itself.

Step 6

  • With the screws removed, insert the plastic opening tool into the groove located on the right side.
  • Begin to pry up, and the plate should lift up from the body of the laptop.
  • While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.

With the screws removed, insert the plastic opening tool into the groove located on the right side.

Begin to pry up, and the plate should lift up from the body of the laptop.

While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.

Step 7

              Fan
  • Carefully pull the fan’s power connector from the laptop.

Carefully pull the fan’s power connector from the laptop.

Step 8

  • Remove the three 5mm Phillips #1 screws holding the fan in place.

Remove the three 5mm Phillips #1 screws holding the fan in place.

Step 9

  • Remove the fan by pulling it up and away from the computer.

Remove the fan by pulling it up and away from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Lucio

Member since: 03/06/2018

217 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S1-G1, Simcock Spring 2018                        

                                                  Member of UMass Dartmouth, Team S1-G1, Simcock Spring 2018 



                    UMASSD-SIMCOCK-S18S1G1                     


                                            3 Members                     


                                            6 Guides authored