Difficulty
Easy
Steps
3
Time Required
3 minutes
Sections
1
- Back Panel
- 3 steps
Flags
0
BackLenovo Essential G570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Turn the laptop over so that the bottom side is facing up.
Turn the laptop over so that the bottom side is facing up.
1024
Step 2
- Unscrew the five 5mm Phillips #0 screws that hold the cover in place.
- The screws do not come out fully from the back plate. They stay attached to the plate itself.
Unscrew the five 5mm Phillips #0 screws that hold the cover in place.
The screws do not come out fully from the back plate. They stay attached to the plate itself.
Step 3
- With the screws removed, insert the plastic opening tool into the groove located on the right side.
- Begin to pry up, and the plate should lift up from the body of the laptop.
- While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.
With the screws removed, insert the plastic opening tool into the groove located on the right side.
Begin to pry up, and the plate should lift up from the body of the laptop.
While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 1 other contributor
Justin Bickford
Member since: 03/01/2018
443 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team S1-G1, Simcock Spring 2018
Member of UMass Dartmouth, Team S1-G1, Simcock Spring 2018
UMASSD-SIMCOCK-S18S1G1
3 Members
6 Guides authored