Difficulty

Easy

Steps

5

Time Required

                          3 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Panel
  • 2 steps
  • Hard Drive
  • 1 step

Flags

0

  • BackLenovo Essential B570

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn over laptop.
  • Switch open the left battery lock.
  • If you are replacing inner components of the laptop, it is recommended to remove the battery first to avoid damage to the laptop.

Turn over laptop.

Switch open the left battery lock.

If you are replacing inner components of the laptop, it is recommended to remove the battery first to avoid damage to the laptop.

1024

Step 2

  • Hold the right battery lock open with one hand while removing the battery itself with the other.

Hold the right battery lock open with one hand while removing the battery itself with the other.

Step 3

              Back Panel
  • Loosen the five Philips screws that secure the panel.
  • The screws do not actually fully remove from the panel. Loosening them as much as you can will be enough to disconnect them from the laptop.

Loosen the five Philips screws that secure the panel.

The screws do not actually fully remove from the panel. Loosening them as much as you can will be enough to disconnect them from the laptop.

Step 4

  • Prop open the cover with a plastic opening tool.
  • If the cover does not come off easily, do not force it. Make sure all screws are loosened.

Prop open the cover with a plastic opening tool.

If the cover does not come off easily, do not force it. Make sure all screws are loosened.

Step 5

              Hard Drive
  • Pull the Hard Drive out of its socket.
  • Lift the tab upwards to remove the hard drive.
  • If you cannot pull the hard drive out of its socket, there is a possibility that there is a 4mm Phillips #1 screw securing it. Locate it and remove it before continuing. It is in very close proximity to the black tab.

Pull the Hard Drive out of its socket.

Lift the tab upwards to remove the hard drive.

If you cannot pull the hard drive out of its socket, there is a possibility that there is a 4mm Phillips #1 screw securing it. Locate it and remove it before continuing. It is in very close proximity to the black tab.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Samuel Filliettaz

Member since: 10/20/2015

819 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team 4-5, Catania Fall 2015                        

                                                  Member of UMass Dartmouth, Team 4-5, Catania Fall 2015 



                    UMASSD-CATANIA-F15S4G5                     


                                            4 Members                     


                                            6 Guides authored