Difficulty
Easy
Steps
5
Time Required
4 minutes
Sections
2
- Bottom Panel
- 3 steps
- RAM
- 2 steps
Flags
0
BackLenovo Edge Thinkpad E431
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Panel
- Close the device and remove all power cables.
- Lay the laptop flat with the bottom facing upwards.
Close the device and remove all power cables.
Lay the laptop flat with the bottom facing upwards.
1024
Step 2
- Remove the four 2mm Phillips #00 screws from the bottom panel.
Remove the four 2mm Phillips #00 screws from the bottom panel.
Step 3
- Remove the back panel of the device.
Remove the back panel of the device.
Step 4
RAM
- Using your fingers, spread the clips away from the RAM module.
- The RAM should “pop” out of its socket.
Using your fingers, spread the clips away from the RAM module.
The RAM should “pop” out of its socket.
Step 5
- Pull the RAM out at a 30 degree angle.
Pull the RAM out at a 30 degree angle.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Nathan Behan
Member since: 02/14/2018
411 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team S3-G3, Nance Spring 2018
Member of USF Tampa, Team S3-G3, Nance Spring 2018
USFT-NANCE-S18S3G3
4 Members
6 Guides authored
