Difficulty

Moderate

Steps

11

Time Required

                          20 - 25 minutes

Sections

2

  • Battery
  • 4 steps
  • Fan
  • 7 steps

Flags

0

  • BackLenovo Edge 2-1580

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.

Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.

1024

Step 2

  • Using a plastic opening tool, pull out the back panel from the laptop.

Using a plastic opening tool, pull out the back panel from the laptop.

Step 3

  • Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws.
  • Disconnect the battery connector from the motherboard.

Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws.

Disconnect the battery connector from the motherboard.

Step 4

  • Pull the battery outward and remove it from the rest of the laptop.

Pull the battery outward and remove it from the rest of the laptop.

Step 5

              Fan
  • Remove the 5.4 mm Phillips #0 screw holding the Wireless Network Card.
  • The network card will pop up by itself.

Remove the 5.4 mm Phillips #0 screw holding the Wireless Network Card.

The network card will pop up by itself.

Step 6

  • Grab the network card and gently pull it out.

Grab the network card and gently pull it out.

Step 7

  • Pull out the RAM metallic cover.

Pull out the RAM metallic cover.

Step 8

  • Grab the black insulating tape and pull it out.

Grab the black insulating tape and pull it out.

Step 9

  • Using the Phillips #0 screwdriver, remove the (6) six fan screws from the device.
  • (5) Five copper and (1) one silver Phillips #0 5.4mm screws.
  • Disconnect the fan from the motherboard.

Using the Phillips #0 screwdriver, remove the (6) six fan screws from the device.

(5) Five copper and (1) one silver Phillips #0 5.4mm screws.

Disconnect the fan from the motherboard.

Step 10

  • Unplug the Fan connector from its socket on the motherboard.

Unplug the Fan connector from its socket on the motherboard.

Step 11

  • Carefully remove the fan from the laptop.

Carefully remove the fan from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Julian Escallon

Member since: 09/27/2017

714 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team S14-G1, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S14-G1, Boczar Fall 2017 



                    USFT-BOCZAR-F17S14G1                     


                                            4 Members                     


                                            5 Guides authored

cfryhover - Jan 7, 2018

Reply

Looks like heat sink and fan are one unit. Advice for regular dust cleaning? How was the condition of the factory thermal paste?

Gabriel Rivera - May 23, 2018

Reply

Where can one find this fan?