Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Wireless LAN Card
- 4 steps
Flags
0
BackLenovo Edge 15
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wireless LAN Card
- With the laptop upside-down, remove all 11 M2 x 6.0mm screws from the cover plate using the Phillips #0 screwdriver.
With the laptop upside-down, remove all 11 M2 x 6.0mm screws from the cover plate using the Phillips #0 screwdriver.
1024
Step 2
- Gently lift the cover plate off the body of the laptop, ensuring that it does not pull on any components such as the USB ports.
Gently lift the cover plate off the body of the laptop, ensuring that it does not pull on any components such as the USB ports.
Step 3
- Remove single 3mm screw holding down the end of the card using a Phillips #1 screwdriver.
Remove single 3mm screw holding down the end of the card using a Phillips #1 screwdriver.
Step 4
- Use hands to disconnect card from slot and remove both cables.
- When replacing connectors be sure to reconnect to proper terminal. Do this by orienting as is in the picture and attaching black cable to left side and white cable to right side.
Use hands to disconnect card from slot and remove both cables.
When replacing connectors be sure to reconnect to proper terminal. Do this by orienting as is in the picture and attaching black cable to left side and white cable to right side.
To reassemble your device, follow these instructions in reverse order. Make sure that connectors are in proper position as shown in step 3.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
ryan sanders
Member since: 09/27/2017
323 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team S8-G1, Banghart Fall 2017
Member of Cal Poly, Team S8-G1, Banghart Fall 2017
CPSU-BANGHART-F17S8G1
5 Members
7 Guides authored
