Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Ram Card
- 4 steps
Flags
0
BackLenovo Edge 15
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Ram Card
- With the laptop upside-down, remove all 11 M2 x 6.0mm screws from the cover plate using the Phillips #0 screwdriver.
With the laptop upside-down, remove all 11 M2 x 6.0mm screws from the cover plate using the Phillips #0 screwdriver.
1024
Step 2
- Gently lift the cover plate off the body of the laptop, ensuring that it does not pull on any components such as the USB ports.
Gently lift the cover plate off the body of the laptop, ensuring that it does not pull on any components such as the USB ports.
Step 3
- Release clips on both sides of ram unit.
Release clips on both sides of ram unit.
Step 4
- With ram unit now erect use hands to remove unit from its slot.
- Place new ram unit into the slot and lightly press down to snap it back into place.
With ram unit now erect use hands to remove unit from its slot.
Place new ram unit into the slot and lightly press down to snap it back into place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
ryan sanders
Member since: 09/27/2017
323 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team S8-G1, Banghart Fall 2017
Member of Cal Poly, Team S8-G1, Banghart Fall 2017
CPSU-BANGHART-F17S8G1
5 Members
7 Guides authored