Difficulty
Easy
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Mouse
- 5 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLenovo Bluetooth Laser Mouse N6901A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Mouse
- 3 Phillips screws are located under the battery cover, unscrew them
3 Phillips screws are located under the battery cover, unscrew them
1024
Step 2
- The mouse cover at the bottom should move freely but at the top is hold by 2 brackets
- In order to remove the mouse cover, you will need to rock left/right the cover and slide it down (from scroll wheel toward the Lenovo logo)
The mouse cover at the bottom should move freely but at the top is hold by 2 brackets
In order to remove the mouse cover, you will need to rock left/right the cover and slide it down (from scroll wheel toward the Lenovo logo)
Step 3
- At this point, you have separated the mouse cover
At this point, you have separated the mouse cover
Step 4
- Use the appropriate tool to remove gently the power connector. Don’t use your finger, you might brake the cable
Use the appropriate tool to remove gently the power connector. Don’t use your finger, you might brake the cable
Step 5
- The micro switch can be replaced by OMRON D2FC-F-7N but you need to trim the solder terminals with a flush wire cutter
- When you reassemble the mouse, make sure you don’t crush the power cable
The micro switch can be replaced by OMRON D2FC-F-7N but you need to trim the solder terminals with a flush wire cutter
When you reassemble the mouse, make sure you don’t crush the power cable
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
Shinn Chyang Chen
Member since: 09/14/2011
2,734 Reputation
3 Guides authored
Badges:
16
+13 more badges
