Difficulty
Moderate
Steps
9
Time Required
3 - 5 minutes
Sections
3
- Battery
- 3 steps
- Back Panel
- 3 steps
- Wi-Fi Card
- 3 steps
Flags
0
BackLenovo B575-1450
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn off the computer.
- Disconnect the charger from the computer.
- Flip the computer upside down.
Turn off the computer.
Disconnect the charger from the computer.
Flip the computer upside down.
1024
Step 2
- Push the right-hand switch outward into the “unlocked” position.
Push the right-hand switch outward into the “unlocked” position.
Step 3
- While holding the battery, use your other hand to push the left clip to the left and pull the battery out.
While holding the battery, use your other hand to push the left clip to the left and pull the battery out.
Step 4
Back Panel
- The screws are captive to the back panel so they are not to be removed.
- Using the Phillips #00 Screwdriver, Loosen the five 5.4 mm screws around the back panel from the laptop.
The screws are captive to the back panel so they are not to be removed.
Using the Phillips #00 Screwdriver, Loosen the five 5.4 mm screws around the back panel from the laptop.
Step 5
- Using a plastic opening tool, pry the back panel from the laptop.
Using a plastic opening tool, pry the back panel from the laptop.
Step 6
- Pull the panel outward from the rest of the laptop. The inside of the laptop will be exposed. From here you can access the CD-ROM drive, hard drive, and Keyboard.
Pull the panel outward from the rest of the laptop. The inside of the laptop will be exposed. From here you can access the CD-ROM drive, hard drive, and Keyboard.
Step 7
Wi-Fi Card
- Using the plastic opening tool, detach both black and grey cables from the Wi-Fi card.
Using the plastic opening tool, detach both black and grey cables from the Wi-Fi card.
Step 8
- Using the Phillips #00 Screwdriver, remove the one 3.4 mm screw from the Wi-Fi card.
Using the Phillips #00 Screwdriver, remove the one 3.4 mm screw from the Wi-Fi card.
Step 9
- Remove Wi-Fi card from the laptop by pulling it out.
Remove Wi-Fi card from the laptop by pulling it out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Carlo Calvillo
Member since: 09/26/2016
742 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Eastern Washington University, Team 1-4, Crane Fall 2016
Member of Eastern Washington University, Team 1-4, Crane Fall 2016
EWU-CRANE-F16S1G4
4 Members
7 Guides authored