Difficulty

Easy

Steps

7

Time Required

Suggest a time??

Sections

1

  • HDD, RAM, WiFi, CMOS Battery
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLenovo B50

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Battery
  • Switch off the laptop, disconnect the AC adapter, and remove the battery.

Switch off the laptop, disconnect the AC adapter, and remove the battery.

1024

Step 2

              Memory / HDD cover
  • Remove the screws securing the Memory / HDD cover.
  • Slide the cover down and remove it.

Remove the screws securing the Memory / HDD cover.

Slide the cover down and remove it.

Step 3

              Memory Modules
  • To pop up the memory module you’ll have to spread latches on both sides of the slot.
  • MEMORY
  • Speed 1600 MHz / PC3L-12800
  • Technology DDR3L SDRAM SODIMM
  • Max Supported Size 16 GB
  • Form Factor SO-DIMM 204-pin
  • Slots Qty 2
  • Empty Slots 1

To pop up the memory module you’ll have to spread latches on both sides of the slot.

MEMORY

Speed 1600 MHz / PC3L-12800

Technology DDR3L SDRAM SODIMM

Max Supported Size 16 GB

Form Factor SO-DIMM 204-pin

Slots Qty 2

Empty Slots 1

Step 4

              Hard Disk Drive (HDD)
  • Remove two screws securing the hard drive mounting bracked.
  • Slide the HDD to the left to disconnect it from the motherboard and remove it from the device.
  • Remove two screws on each side of the HDD to remove the mounting bracket.
  • Now you have to transfer the mounting bracket to the new HDD or SSD.

Remove two screws securing the hard drive mounting bracked.

Slide the HDD to the left to disconnect it from the motherboard and remove it from the device.

Remove two screws on each side of the HDD to remove the mounting bracket.

Now you have to transfer the mounting bracket to the new HDD or SSD.

Step 5

              Wireless / Bluetooth Card
  • Remove the screw and disconnect the two coaxial antenna cables from the WiFi card.
  • Pop it up and remove it from the slot.
  • Wireless N M.2, or Next Generation Form Factor (NGFF) Card.

Remove the screw and disconnect the two coaxial antenna cables from the WiFi card.

Pop it up and remove it from the slot.

Wireless N M.2, or Next Generation Form Factor (NGFF) Card.

Step 6

              CMOS Battery
  • Complementary Metal-Oxide-Semiconductor (CMOS) aka Real-Time Clock (RTC)
  • CR2032

Complementary Metal-Oxide-Semiconductor (CMOS) aka Real-Time Clock (RTC)

CR2032

Step 7

  • That’s all.

That’s all.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored