Difficulty

Easy

Steps

9

Time Required

                          30 minutes - 1 hour            

Sections

3

  • Back Panel
  • 3 steps
  • Battery
  • 3 steps
  • Wi-Fi Card
  • 3 steps

Flags

1

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

  • BackLenovo 500e Chromebook 2nd Gen

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel               
  • Remove nine 6 mm screws from the bottom cover of the laptop using a Phillips #0 screwdriver.

Remove nine 6 mm screws from the bottom cover of the laptop using a Phillips #0 screwdriver.

1024

Step 2

  • Remove stylus from the lower left corner of the back panel.

Remove stylus from the lower left corner of the back panel.

Step 3

  • Go along the edge of the back panel with an iFixit opening tool until it pops loose.
  • Remove the back panel from the laptop.

Go along the edge of the back panel with an iFixit opening tool until it pops loose.

Remove the back panel from the laptop.

Step 4

              Battery               
  • Remove the four 4 mm Phillips #00 screws holding the battery in.

Remove the four 4 mm Phillips #00 screws holding the battery in.

Step 5

  • Use the iFixit opening tool to unplug the battery from the motherboard.
  • Potential for device damage: Make sure to be gentle while removing the wire.

Use the iFixit opening tool to unplug the battery from the motherboard.

Potential for device damage: Make sure to be gentle while removing the wire.

Step 6

  • Remove the battery from the laptop.

Remove the battery from the laptop.

Step 7

              Wi-Fi Card               
  • Remove the single 2 mm screw from the Wi-Fi card using a Phillips #00 screwdriver.

Remove the single 2 mm screw from the Wi-Fi card using a Phillips #00 screwdriver.

Step 8

  • Detach the Wi-Fi card from the motherboard using an iFixit opening tool.

Detach the Wi-Fi card from the motherboard using an iFixit opening tool.

Step 9

  • Using tweezers, disconnect the two wires from the Wi-Fi card.
  • Remove the Wi-Fi card from the laptop.

Using tweezers, disconnect the two wires from the Wi-Fi card.

Remove the Wi-Fi card from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Nicolas Lidinsky                     

Member since: 01/09/2022

629 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Illinois Wesleyan University, Team 1-3, Bullock Spring 2022                        

                                                  Member of Illinois Wesleyan University, Team 1-3, Bullock Spring 2022 



                    IWU-BULLOCK-S22S1G3                     


                                            3 Members                     


                                            5 Guides authored