Lenovo 500E Chromebook 2Nd Gen Speakers Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          30 minutes - 1 hour            

Sections

3

• Back Panel
• 3 steps
• Battery
• 3 steps
• Speakers
• 3 steps

Flags

0

• BackLenovo 500e Chromebook 2nd Gen

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Remove nine 6 mm screws from the bottom cover of the laptop using a Phillips #0 screwdriver.

Remove nine 6 mm screws from the bottom cover of the laptop using a Phillips #0 screwdriver.

1024

Step 2

• Remove stylus from the lower left corner of the back panel.

Remove stylus from the lower left corner of the back panel.

Step 3

• Go along the edge of the back panel with an iFixit opening tool until it pops loose.
• Remove the back panel from the laptop.

Go along the edge of the back panel with an iFixit opening tool until it pops loose.

Remove the back panel from the laptop.

Step 4

              Battery               

• Remove the four 4 mm Phillips #00 screws holding the battery in.

Remove the four 4 mm Phillips #00 screws holding the battery in.

Step 5

• Use the iFixit opening tool to unplug the battery from the motherboard.
• Potential for device damage: Make sure to be gentle while removing the wire.

Use the iFixit opening tool to unplug the battery from the motherboard.

Potential for device damage: Make sure to be gentle while removing the wire.

Step 6

• Remove the battery from the laptop.

Remove the battery from the laptop.

Step 7

              Speakers               

• Remove the two 4 mm screws (one on each speaker) using a Phillips #00 screwdriver.

Remove the two 4 mm screws (one on each speaker) using a Phillips #00 screwdriver.

Step 8

• Use the iFixit opening tool to detach the right speaker cable from the motherboard.

Use the iFixit opening tool to detach the right speaker cable from the motherboard.

Step 9

• Remove both speakers by gently pulling them out.

Remove both speakers by gently pulling them out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Nicolas Lidinsky                     

Member since: 01/09/2022

629 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Illinois Wesleyan University, Team 1-3, Bullock Spring 2022                        

                                                  Member of Illinois Wesleyan University, Team 1-3, Bullock Spring 2022 



                    IWU-BULLOCK-S22S1G3                     


                                            3 Members                     


                                            5 Guides authored