Difficulty
Easy
Steps
6
Time Required
30 - 45 minutes
Sections
2
- Back Panel
- 3 steps
- Battery
- 3 steps
Flags
0
BackLenovo 500e Chromebook 2nd Gen
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove nine 6 mm screws from the bottom cover of the laptop using a Phillips #0 screwdriver.
Remove nine 6 mm screws from the bottom cover of the laptop using a Phillips #0 screwdriver.
1024
Step 2
- Remove stylus from the lower left corner of the back panel.
Remove stylus from the lower left corner of the back panel.
Step 3
- Go along the edge of the back panel with an iFixit opening tool until it pops loose.
- Remove the back panel from the laptop.
Go along the edge of the back panel with an iFixit opening tool until it pops loose.
Remove the back panel from the laptop.
Step 4
Battery
- Remove the four 4 mm Phillips #00 screws holding the battery in.
Remove the four 4 mm Phillips #00 screws holding the battery in.
Step 5
- Use the iFixit opening tool to unplug the battery from the motherboard.
- Potential for device damage: Make sure to be gentle while removing the wire.
Use the iFixit opening tool to unplug the battery from the motherboard.
Potential for device damage: Make sure to be gentle while removing the wire.
Step 6
- Remove the battery from the laptop.
Remove the battery from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Nicolas Lidinsky
Member since: 01/09/2022
629 Reputation
5 Guides authored
Badges:
4
+1 more badge
Team
Illinois Wesleyan University, Team 1-3, Bullock Spring 2022
Member of Illinois Wesleyan University, Team 1-3, Bullock Spring 2022
IWU-BULLOCK-S22S1G3
3 Members
5 Guides authored
