Difficulty
Easy
Steps
4
Time Required
6 minutes
Sections
2
- Back Cover
- 2 steps
- USB and Charging Ports
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackLenovo 300e
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove eleven 5 mm screws from the back of the computer using a Phillips #2 screwdriver.
Remove eleven 5 mm screws from the back of the computer using a Phillips #2 screwdriver.
1024
Step 2
- Use a spudger along the edge of the Chromebook to gently remove the back cover of the laptop.
Use a spudger along the edge of the Chromebook to gently remove the back cover of the laptop.
Step 3
USB and Charging Ports
- Remove three 5 mm screws from the USB board using a Phillips #2 screwdriver.
Remove three 5 mm screws from the USB board using a Phillips #2 screwdriver.
Step 4
- Detach the white and blue ribbon cable from its cable connector on the USB board.
- Remove the USB board from the laptop.
Detach the white and blue ribbon cable from its cable connector on the USB board.
Remove the USB board from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Merit Kuykendall
Member since: 09/17/2021
547 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Western Carolina University, Team 1-5, Virtue Fall 2021
Member of Western Carolina University, Team 1-5, Virtue Fall 2021
WCU-VIRTUE-F21S1G5
4 Members
5 Guides authored