Lenovo 100S Chromebook 11Iby Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes            

Sections

1

• Speakers
• 7 steps

Flags

0

• BackLenovo 100s Chromebook-11IBY

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Speakers               

• Ensure your device is turned off and unplugged.

Ensure your device is turned off and unplugged.

1024

Step 2

• Use a #0 Phillips screwdriver to remove the nine 6mm screws from the larger back plate.

Use a #0 Phillips screwdriver to remove the nine 6mm screws from the larger back plate.

Step 3

• Turn your laptop back over, open it, and use the plastic opening tool on the recessed notch to gently pry each side and lift the keyboard plate up.
• Be careful not to pull keyboard plate out immediately because cables are attached.

Turn your laptop back over, open it, and use the plastic opening tool on the recessed notch to gently pry each side and lift the keyboard plate up.

Be careful not to pull keyboard plate out immediately because cables are attached.

Step 4

• Locate the two sticker-like connecting wires (for the keyboard and touchpad).
• Carefully unplug the orange circled (keyboard) wire from the keyboard plate.
• Carefully unplug the yellow circled (touchpad) wire from the keyboard plate.
• Then lift the keyboard plate up and place it to the side.

Locate the two sticker-like connecting wires (for the keyboard and touchpad).

Carefully unplug the orange circled (keyboard) wire from the keyboard plate.

Carefully unplug the yellow circled (touchpad) wire from the keyboard plate.

Then lift the keyboard plate up and place it to the side.

Step 5

• Locate the cable attaching the left speaker to the motherboard and unplug it by hand.
• Then unplug the cable attaching the right speaker by hand.

Locate the cable attaching the left speaker to the motherboard and unplug it by hand.

Then unplug the cable attaching the right speaker by hand.

Step 6

• Carefully pry the speaker up and free of the two notches holding it in place.
• Remove the speaker.

Carefully pry the speaker up and free of the two notches holding it in place.

Remove the speaker.

Step 7

• Repeat steps 5 & 6 in order to remove the right speaker.

Repeat steps 5 & 6 in order to remove the right speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Milton Perez                     

Member since: 03/09/2017

630 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team S7-G2, Cagle Spring 2017                        

                                                  Member of USF Tampa, Team S7-G2, Cagle Spring 2017 



                    USFT-CAGLE-S17S7G2                     


                                            1 Member                     


                                            10 Guides authored