Lenovo 100S Chromebook 11Iby Battery Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes            

Sections

1

• Battery
• 7 steps

Flags

0

• BackLenovo 100s Chromebook-11IBY

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Ensure your device is turned off and unplugged.

Ensure your device is turned off and unplugged.

1024

Step 2

• Use a Phillips #0 screwdriver to remove the nine 6mm screws from the larger back plate.

Use a Phillips #0 screwdriver to remove the nine 6mm screws from the larger back plate.

Step 3

• Turn your laptop back over, open it, and use the plastic opening tool on the recessed notch to gently pry each side and lift the keyboard plate up.
• Be careful not to pull keyboard plate out immediately because cables are attached.

Turn your laptop back over, open it, and use the plastic opening tool on the recessed notch to gently pry each side and lift the keyboard plate up.

Be careful not to pull keyboard plate out immediately because cables are attached.

Step 4

• Unlock the keyboard ZIF connector to release the keyboard flex cable.
• To unlock a ZIF connector, use an opening tool or your fingernail to flip up the small, hinged locking flap.
• Unlock the touchpad ZIF connector to release the touchpad flex cable.
• Carefully pull both flex cables out of the ZIF connectors.
• Remove the keyboard plate up and place it to the side.

Unlock the keyboard ZIF connector to release the keyboard flex cable.

To unlock a ZIF connector, use an opening tool or your fingernail to flip up the small, hinged locking flap.

Unlock the touchpad ZIF connector to release the touchpad flex cable.

Carefully pull both flex cables out of the ZIF connectors.

Remove the keyboard plate up and place it to the side.

Step 5

• Unplug the battery cable by pulling it towards the battery.
• Pull parallel to the battery, not straight up.

Unplug the battery cable by pulling it towards the battery.

Pull parallel to the battery, not straight up.

Step 6

• Use the Phillips #0 screwdriver to remove the three 6mm screws from the battery.

Use the Phillips #0 screwdriver to remove the three 6mm screws from the battery.

Step 7

• Remove the battery.

Remove the battery.

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Milton Perez                     

Member since: 03/09/2017

630 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team S7-G2, Cagle Spring 2017                        

                                                  Member of USF Tampa, Team S7-G2, Cagle Spring 2017 



                    USFT-CAGLE-S17S7G2                     


                                            1 Member                     


                                            10 Guides authored