Difficulty

Moderate

Steps

5

Time Required

                          30 minutes

Sections

1

  • Battery
  • 5 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackLenovo 100e 2nd Gen

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before you begin, make sure the laptop is powered off and unplug all cables from the device.
  • Use the Phillips #0 screwdriver to remove the nine 1.2 mm screws on the bottom side of the laptop.

Before you begin, make sure the laptop is powered off and unplug all cables from the device.

Use the Phillips #0 screwdriver to remove the nine 1.2 mm screws on the bottom side of the laptop.

1024

Step 2

  • Use a plastic opening tool to pry the bottom cover from the laptop.
  • Pry all four sides of the bottom panel to safely remove the bottom panel from the device.
  • Carefully remove the bottom panel and place it to the side.

Use a plastic opening tool to pry the bottom cover from the laptop.

Pry all four sides of the bottom panel to safely remove the bottom panel from the device.

Carefully remove the bottom panel and place it to the side.

Step 3

  • Use a Phillips #0 screwdriver to remove the four 1 mm screws that are holding the battery in place.

Use a Phillips #0 screwdriver to remove the four 1 mm screws that are holding the battery in place.

Step 4

  • Unplug the battery from the motherboard.
  • Lift the daughterboard ribbon to make it easier to remove the battery safely.
  • Completely remove the old battery and place it to the side.

Unplug the battery from the motherboard.

Lift the daughterboard ribbon to make it easier to remove the battery safely.

Completely remove the old battery and place it to the side.

Step 5

  • Insert the new battery by connecting the battery to the motherboard.
  • Lift the daughterboard ribbon and place the new battery under the ribbon.

Insert the new battery by connecting the battery to the motherboard.

Lift the daughterboard ribbon and place the new battery under the ribbon.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Meri Wheeler

Member since: 02/19/2021

178 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       University of Alabama, Team S3-G2, Bedsole Spring 2021                        

                                                  Member of University of Alabama, Team S3-G2, Bedsole Spring 2021 



                    UA-BEDSOLE-S21S3G2                     


                                            2 Members                     


                                            1 Guide authored