Featured
Featured Guide
Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Tripod Socket
- 3 steps
Flags
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackLeica Z2X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Bottom Screws
- Carefully unscrew the four Phillips #0 screws on the bottom of the camera.
- There is a screw located inside of the tripod hole (large circle.) Make sure the screw is removed from there too!
Carefully unscrew the four Phillips #0 screws on the bottom of the camera.
There is a screw located inside of the tripod hole (large circle.) Make sure the screw is removed from there too!
1024
Step 2
Open the Back Door
- Open the back door on the camera by pushing down on the door latch.
Open the back door on the camera by pushing down on the door latch.
Step 3
Remove the Bottom Plate
- Apply pressure to the bottom plate and it will pop off.
- From here, you can replace the bottom plate, or continue on to further steps.
Apply pressure to the bottom plate and it will pop off.
From here, you can replace the bottom plate, or continue on to further steps.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 8 other contributors
Zachary
Member since: 04/12/2011
43 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 18-19, Garner Spring 2011
Member of Cal Poly, Team 18-19, Garner Spring 2011
CPSU-GARNER-S11S18G19
4 Members
12 Guides authored
