Difficulty

Easy

Steps

4

Time Required

                          10 minutes

Sections

1

  • Led Lenser P2 BM Button Disassembly
  • 4 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackLed Lenser P2 BM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Unscrew rear cap from the main housing
  • This is exactly how you would do it if you were changing the battery.

This is exactly how you would do it if you were changing the battery.

1024

Step 2

              Separate the cap and split the plastic housing.
  • I used a pair of pliers to hold the plastic part right under the threading and using my fingers on the aluminum part just unscrew.

I used a pair of pliers to hold the plastic part right under the threading and using my fingers on the aluminum part just unscrew.

Step 3

              Separate the button.
  • The “lid” is held on by 4 plastic “rivets”. Carefully put a knife blade in between the small lid and pry them apart. Carefully remove the inner spriIngs and plungers. In the picture one small plunger is still in the top of the button.

The “lid” is held on by 4 plastic “rivets”. Carefully put a knife blade in between the small lid and pry them apart. Carefully remove the inner spriIngs and plungers. In the picture one small plunger is still in the top of the button.

Step 4

              Reassemble
  • Is reversed of disassembly but you don’t need to glue the button together (the small plastic “rivets” are now broken) because the two part plastic housing will keep it together when assembled.

Is reversed of disassembly but you don’t need to glue the button together (the small plastic “rivets” are now broken) because the two part plastic housing will keep it together when assembled.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Hans

Member since: 04/25/2016

127 Reputation

                                      1 Guide authored                  



                       Badges:
                       3