Difficulty
Difficult
Steps
7
Time Required
20 - 30 minutes
Sections
2
- Battery
- 3 steps
- Speaker
- 4 steps
Flags
0
BackLeapfrog My Own Leaptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip over device so that back portion of the device is facing you.
Flip over device so that back portion of the device is facing you.
1024
Step 2
- Unscrew the one 10mm screw that holds the battery cover in place with a a PH1 phillips head screwdriver.
- Please note that the screw cannot be removed as it is attached to the battery cover.
Unscrew the one 10mm screw that holds the battery cover in place with a a PH1 phillips head screwdriver.
Please note that the screw cannot be removed as it is attached to the battery cover.
Step 3
- Carefully pry the batteries out with a plastic opening tool prying from the non spring side.
- Remove the three AA batteries.
- Note the direction of the batteries for when reassembling.
Carefully pry the batteries out with a plastic opening tool prying from the non spring side.
Remove the three AA batteries.
Note the direction of the batteries for when reassembling.
Step 4
Speaker
- Remove the eleven 10mm screws from the back of the device with a a PH1 phillips head screwdriver.
Remove the eleven 10mm screws from the back of the device with a a PH1 phillips head screwdriver.
Step 5
- Carefully remove back of the device.
- Make sure not to rip the wires when lifting the cover off.
Carefully remove back of the device.
Make sure not to rip the wires when lifting the cover off.
Step 6
- Unscrew the two 7.5 mm screws to the left and right of the speaker with a PH1 phillips head screwdriver.
- Remove the cover and place to the side.
Unscrew the two 7.5 mm screws to the left and right of the speaker with a PH1 phillips head screwdriver.
Remove the cover and place to the side.
Step 7
- Once the cover is removed, gently lift up the speaker making sure not to rip or break the wires.
- If you are disassembling the device to clean the speaker, clean it at this point with a soft, lightly dampened cloth.
- Gently turn the speaker over and carefully desolder the white and yellow wires from the speaker.
Once the cover is removed, gently lift up the speaker making sure not to rip or break the wires.
If you are disassembling the device to clean the speaker, clean it at this point with a soft, lightly dampened cloth.
Gently turn the speaker over and carefully desolder the white and yellow wires from the speaker.
To reassemble your device, follow these instructions in reverse order.
Any issues that cannot be resolved with any portion of this wiki please contact Leapfrog Customer Serivce
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Jonathan Fitzer
Member since: 02/10/2016
584 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 14-6, Lacy Spring 2016
Member of USF Tampa, Team 14-6, Lacy Spring 2016
USFT-LACY-S16S14G6
4 Members
6 Guides authored
Don La - Aug 30, 2017
Reply
Thanks for this very useful instruction. Where can I buy a replacement speaker?
-Don
Jimmy Liang - Sep 3, 2017
Reply
I agree, but I also second the question…where can I buy a replacement speaker?
Zuzi - Apr 26, 2018
Reply
Where could I purchase a replacement speaker?
stanley.met - Nov 21, 2018
Reply
Where could I buy the replacement speaker in Malaysia?
ribenabona - Jan 13, 2019
Reply
Where can I buy replacement speaker in Malaysia? Appreciate yr reply
