Difficulty
Easy
Steps
11
Time Required
10 minutes
Sections
2
- Battery
- 3 steps
- Buttons
- 8 steps
Flags
0
BackLeapFrog LeapTV
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use the Metal Spudger to push the release clip on the battery cover.
Use the Metal Spudger to push the release clip on the battery cover.
1024
Step 2
- Lift the cover off.
Lift the cover off.
Step 3
- The battery holder is now visible with the removal of the cover.
The battery holder is now visible with the removal of the cover.
Step 4
Buttons
- Use the screwdriver to remove the eight 8.7mm PH1 Phillips head screws.
Use the screwdriver to remove the eight 8.7mm PH1 Phillips head screws.
Step 5
- Slightly lift up on the back cover until the handle covers are free to rotate.
Slightly lift up on the back cover until the handle covers are free to rotate.
Step 6
- Slide the the side of the handle facing you to the left to reveal the “A” and “B” button circuit board.
Slide the the side of the handle facing you to the left to reveal the “A” and “B” button circuit board.
Step 7
- Use the screwdriver to remove the three 8.5mm PH1 Phillips head screws.
Use the screwdriver to remove the three 8.5mm PH1 Phillips head screws.
Step 8
- Lift up on the circuit board and move it to the side.
- Be careful to not cause excess stress to the connecting wires when handling the circuit board. Excess stress can cause solder points to break.
Lift up on the circuit board and move it to the side.
Be careful to not cause excess stress to the connecting wires when handling the circuit board. Excess stress can cause solder points to break.
Step 9
- Use the plastic opening tool to release the buttons from the controller casing.
Use the plastic opening tool to release the buttons from the controller casing.
Step 10
- Remove the “A” and “B” buttons by pulling up on one of the buttons.
Remove the “A” and “B” buttons by pulling up on one of the buttons.
Step 11
- Buttons are now removed.
Buttons are now removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Triston Fischer
Member since: 03/08/2017
128 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
IUPUI, Team S4-G2, Baechle Spring 2017
Member of IUPUI, Team S4-G2, Baechle Spring 2017
IUPUI-BAECHLE-S17S4G2
3 Members
3 Guides authored
