Leapfrog Leappad2 Explorer Back Cover Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 - 5 minutes

Sections

Battery
2 steps
Back Cover
2 steps

Flags

BackLeapFrog LeapPad2 Explorer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Before disassembling your LeapPad, ensure your device is shut off.
Push outward on the plastic side panels to remove and reveal battery.
The panels should detach fully from the main device.

Before disassembling your LeapPad, ensure your device is shut off.

Push outward on the plastic side panels to remove and reveal battery.

The panels should detach fully from the main device.

1024

Step 2

Push down from the positive end of the battery towards the negative end to pry the battery up out of its dispenser.
Remove all four AA alkaline batteries from the device.

Push down from the positive end of the battery towards the negative end to pry the battery up out of its dispenser.

Remove all four AA alkaline batteries from the device.

Step 3

              Back Cover

This step will void your device warranty.
Remove the following screws securing the back cover to the main device:
Two 10.0 mm Phillips screws
Four 4.0 mm Phillips screws
Three 3.0 mm Phillips screws

This step will void your device warranty.

Remove the following screws securing the back cover to the main device:

Two 10.0 mm Phillips screws

Four 4.0 mm Phillips screws

Three 3.0 mm Phillips screws

Step 4

Insert a plastic opening tool into the seam between the front and rear covers to detach the back cover from the rest of the device.
Move the plastic opening tool around the perimeter of the LeapPad2.
Lift up and remove the rear case from the tablet.
A butter knife can help when prying the device.

Insert a plastic opening tool into the seam between the front and rear covers to detach the back cover from the rest of the device.

Move the plastic opening tool around the perimeter of the LeapPad2.

Lift up and remove the rear case from the tablet.

A butter knife can help when prying the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Nupur Garg

Member since: 04/12/2014

867 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 8-10, Regan Spring 2014                        

                                                  Member of Cal Poly, Team 8-10, Regan Spring 2014 



                    CPSU-REGAN-S14S8G10                     


                                            4 Members                     


                                            16 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team