Leapfrog Leappad Ultra Xdi Battery Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          15 minutes            

Sections

1

• Battery
• 6 steps

Flags

0

• BackLeapFrog LeapPad Ultra XDi

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The battery provides power to the device. When this part is not working properly the device may not power on or hold a charge. You should first try the battery troubleshooting guide before replacing the entire battery.

If the battery looks swollen, damaged, or is leaking fluid proceed with caution.

Before beginning, make sure to power down the device completely and disconnect it from any power source.

What you need

Step 1

              Battery               

• Orient the tablet so it’s laying screen down and the barcode sticker is facing up.
• Remove the barcode sticker to expose the two screws.

Orient the tablet so it’s laying screen down and the barcode sticker is facing up.

Remove the barcode sticker to expose the two screws.

1024

Step 2

• Remove the two 5.0mm Phillips #0 screws.

Remove the two 5.0mm Phillips #0 screws.

Step 3

• Using the iFixit opening tool, pry off the purple and white child-proof casing to expose the twelve screws.

Using the iFixit opening tool, pry off the purple and white child-proof casing to expose the twelve screws.

Step 4

• Remove all twelve 7mm Phillips #1 screws located along the edges of the device.

Remove all twelve 7mm Phillips #1 screws located along the edges of the device.

Step 5

• Remove the purple case, exposing the motherboard and battery.

Remove the purple case, exposing the motherboard and battery.

Step 6

• Use the Spudger to remove the glued down battery.
• Using your fingers, grab the battery wires and carefully unplug them from the motherboard.
• Replace the battery with a new one.

Use the Spudger to remove the glued down battery.

Using your fingers, grab the battery wires and carefully unplug them from the motherboard.

Replace the battery with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Victoria Shew                     

Member since: 08/28/2019

503 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       University of North Texas, Team S1-G4, Friess Fall 2019                        

                                                  Member of University of North Texas, Team S1-G4, Friess Fall 2019 



                    UNT-FRIESS-F19S1G4                     


                                            3 Members                     


                                            5 Guides authored