Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Back Panel
- 2 steps
Flags
0
BackLeapFrog LeapPad Ultimate
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Flip over the Pad to its back side to begin the removal of the back panel.
- Begin by removing the blue rim along the edge of the device. It runs along the green silicone lining.
- This is very difficult to remove , so do be patient. To help remove the seal, both a metal spudger and plastic opening tool may be used.
- Remove the pen from its place before starting to avoid tangling.
Flip over the Pad to its back side to begin the removal of the back panel.
Begin by removing the blue rim along the edge of the device. It runs along the green silicone lining.
This is very difficult to remove , so do be patient. To help remove the seal, both a metal spudger and plastic opening tool may be used.
Remove the pen from its place before starting to avoid tangling.
1024
Step 2
- Once the blue rim is removed, the 12 screws will be visible.
- Use the Phillips #1 screwdriver to unscrew all 12 screws.
Once the blue rim is removed, the 12 screws will be visible.
Use the Phillips #1 screwdriver to unscrew all 12 screws.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Nabil Mustafa
Member since: 09/21/2018
223 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
University of North Texas, Team S1-G13, Riccardelli Fall 2018
Member of University of North Texas, Team S1-G13, Riccardelli Fall 2018
UNT-RICCARDELLI-F18S1G13
4 Members
12 Guides authored
