Leapfrog Leappad Platinum Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes            

Sections

1

• Battery
• 6 steps

Flags

0

• BackLeapFrog LeapPad Platinum

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Place your tablet on a flat surface with the screen facing down.

Place your tablet on a flat surface with the screen facing down.

1024

Step 2

• Using a plastic opening tool, pry off the plastic border by inserting it in the space between the green bumper and the white plastic on the edge of the tablet.
• The border snaps into place, so don’t be too worried if you hear a cracking noise while prying it off.

Using a plastic opening tool, pry off the plastic border by inserting it in the space between the green bumper and the white plastic on the edge of the tablet.

The border snaps into place, so don’t be too worried if you hear a cracking noise while prying it off.

Step 3

• Remove the 11 Phillips screws (8.0 mm) located around the edge of the back cover with a Phillips screwdriver.

Remove the 11 Phillips screws (8.0 mm) located around the edge of the back cover with a Phillips screwdriver.

Step 4

• Pull the back cover off of your device.

Pull the back cover off of your device.

Step 5

• Wedge a plastic opening tool underneath the battery and lift the battery up.
• The battery is held in place by an adhesive strip, so it can be difficult to pry off.

Wedge a plastic opening tool underneath the battery and lift the battery up.

The battery is held in place by an adhesive strip, so it can be difficult to pry off.

Step 6

• The battery has red, black, and white wires that are all connected to the motherboard through a plastic clip. Unplug this plastic clip to fully remove the battery from your device.

The battery has red, black, and white wires that are all connected to the motherboard through a plastic clip. Unplug this plastic clip to fully remove the battery from your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Brittney Cooper                     

Member since: 02/17/2016

191 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UW Tacoma, Team 1-5, Rose Winter 2016                        

                                                  Member of UW Tacoma, Team 1-5, Rose Winter 2016 



                    UWT-ROSE-W16S1G5                     


                                            4 Members                     


                                            8 Guides authored                     

Ann-Mariah Thurber - Oct 6, 2021

Reply

Any advice on how to fix a stylus go a leap pad platinum? The top is damaged- can I use any stylus or another platinum stylus it just buy a mesh tip? I can’t seem to find any too buy???