Difficulty
Moderate
Steps
12
Time Required
45 minutes
Sections
4
- Battery
- 3 steps
- Speaker
- 3 steps
- Motherboard
- 3 steps
- Front Facing Camera
- 3 steps
Flags
0
BackLeapfrog LeapPad 3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Before taking apart your device, ensure that it is turned off and that your anti-static wrist strap is secured to a ground.
- Remove the six 10.0 mm Phillips #0 screws from the outer case and remove the cover with your hands.
- You will not need to pry the case off.
Before taking apart your device, ensure that it is turned off and that your anti-static wrist strap is secured to a ground.
Remove the six 10.0 mm Phillips #0 screws from the outer case and remove the cover with your hands.
You will not need to pry the case off.
1024
Step 2
- Unplug the battery from the motherboard with your hands.
- The battery sits to the right of the motherboard.
Unplug the battery from the motherboard with your hands.
The battery sits to the right of the motherboard.
Step 3
- Pry the battery gently off of the plastic platform with an opening tool.
- Do not to puncture the battery, as the material inside can be dangerous.
Pry the battery gently off of the plastic platform with an opening tool.
Do not to puncture the battery, as the material inside can be dangerous.
Step 4
Speaker
- Disconnect the audio cord from the motherboard using a plastic opening tool.
- When re-plugging this cord be sure it is flush with the slot, otherwise the speaker and directional pad will malfunction.
- Use caution when unplugging, and re-plugging the ribbon cord as they are fragile.
Disconnect the audio cord from the motherboard using a plastic opening tool.
When re-plugging this cord be sure it is flush with the slot, otherwise the speaker and directional pad will malfunction.
Use caution when unplugging, and re-plugging the ribbon cord as they are fragile.
Step 5
- Unscrew the five 6.0 mm phillips head screws from the board containing the audio jack and directional pad.
Unscrew the five 6.0 mm phillips head screws from the board containing the audio jack and directional pad.
Step 6
- Unscrew the three 6.5 mm phillips head screws holding down the speaker to the right of the audio jack.
- Remove the board and speaker from the device.
Unscrew the three 6.5 mm phillips head screws holding down the speaker to the right of the audio jack.
Remove the board and speaker from the device.
Step 7
Motherboard
- Unplug the front facing camera cord with an opening tool to free the top of the motherboard.
Unplug the front facing camera cord with an opening tool to free the top of the motherboard.
Step 8
- Remove the three 6 mm phillips head screws holding the motherboard to the display assembly.
Remove the three 6 mm phillips head screws holding the motherboard to the display assembly.
Step 9
- Carefully lift the motherboard out of the case, exposing the last remaining cord on the underside of the motherboard.
- Disconnect the gold display assembly cord with an opening tool to fully disconnect the motherboard.
- The device was rotated 180 degrees in order to unplug the display assembly cord.
Carefully lift the motherboard out of the case, exposing the last remaining cord on the underside of the motherboard.
Disconnect the gold display assembly cord with an opening tool to fully disconnect the motherboard.
The device was rotated 180 degrees in order to unplug the display assembly cord.
Step 10
Front Facing Camera
- Unscrew the eight 6.5 mm phillips screws from the plastic casing.
Unscrew the eight 6.5 mm phillips screws from the plastic casing.
Step 11
- Remove the covering with your hand to expose the front facing camera.
Remove the covering with your hand to expose the front facing camera.
Step 12
- Remove the front facing camera from the outer case.
Remove the front facing camera from the outer case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Matt Irvine
Member since: 02/04/2016
952 Reputation
6 Guides authored
Badges:
20
+17 more badges
Team
USF Tampa, Team 16-2, Blackwell Winter 2016
Member of USF Tampa, Team 16-2, Blackwell Winter 2016
USFT-BLACKWELL-W16S16G2
3 Members
12 Guides authored
