Difficulty

Easy

Steps

4

Time Required

                          3 - 5 minutes            

Sections

1

  • Battery
  • 4 steps

Flags

0

  • BackLe Pan S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Remove the two 3.5 mm Phillips #00 screws that are covered by the micro SD port.
  • This cover is adjacent to the volume button on the side of the Le Pan S.

Remove the two 3.5 mm Phillips #00 screws that are covered by the micro SD port.

This cover is adjacent to the volume button on the side of the Le Pan S.

1024

Step 2

  • Insert the spudger between the front and back panel in order to pry them apart.
  • Do this beside the volume button and the micro SD cover.
  • Pry open the rest of the Le Pan S by dragging the spudger across the side.

Insert the spudger between the front and back panel in order to pry them apart.

Do this beside the volume button and the micro SD cover.

Pry open the rest of the Le Pan S by dragging the spudger across the side.

Step 3

  • Once the front and back faces are completely separated, remove the back cover to reveal the inside components.

Once the front and back faces are completely separated, remove the back cover to reveal the inside components.

Step 4

  • Disconnect the battery from the circuitry and lay it out of the way.
  • The best method to complete this is to pull the bundled cable connector out with your hands. Pull towards the wires and away from the electrical board. Use the spudger to further coax the cable out.
  • If you are replacing your battery, make sure to dispose of it properly.

Disconnect the battery from the circuitry and lay it out of the way.

The best method to complete this is to pull the bundled cable connector out with your hands. Pull towards the wires and away from the electrical board. Use the spudger to further coax the cable out.

If you are replacing your battery, make sure to dispose of it properly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Maria Dole                     

Member since: 09/17/2015

395 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       IUPUI, Team 2-1, Harley Fall 2015                        

                                                  Member of IUPUI, Team 2-1, Harley Fall 2015 



                    IUPUI-HARLEY-F15S2G1                     


                                            5 Members                     


                                            10 Guides authored                     

Timothy - Dec 11, 2016

Reply

where can I purchase a battery for a tc978

jatrussel - Sep 30, 2018

Hi Timothy, Did you ever find out where to purchase a battery for your Le Pan S tablet?

cdboers - Dec 16, 2016

Reply

But what do I do when it’s not the battery, but is the charger is so loose in the tablet, it won;t charge. Once in a while, I can get it to come on if I happened to hold the charger just right. So disgusting. Can this be fixed.? i have purchased two LePans and neither will charge.

jatrussel - Nov 5, 2017

Reply

Where can I purchase the battery needed?????????????????

Denny Ehlers - Feb 18, 2021

Reply

Thank you Maria!

Easy to take apart. Disconnected/reconnected battery and voila!

All good.

Be well.

Den E