Difficulty
Moderate
Steps
9
Time Required
15 minutes
Sections
2
- Screen
- 6 steps
- Charging Port
- 3 steps
Flags
1
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackLe Pan II
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Insert metal spudger between front and back panel to pry apart.
- Continue to pry while moving the metal spudger along the crevice to completely separate two panels.
- Avoid using metal when opening devices, as it can damage or crack the screen.
Insert metal spudger between front and back panel to pry apart.
Continue to pry while moving the metal spudger along the crevice to completely separate two panels.
Avoid using metal when opening devices, as it can damage or crack the screen.
1024
Step 2
- Use the plastic opening tool to disconnect the flat ribbon cable from the motherboard connector.
- Disconnect the flat ribbon by gently pulling it out from its connecting port.
Use the plastic opening tool to disconnect the flat ribbon cable from the motherboard connector.
Disconnect the flat ribbon by gently pulling it out from its connecting port.
Step 3
- Use the plastic opening tool to disconnect the display cable from its motherboard connector.
- Disconnect the display cable by gently pulling it out from its connecting port.
Use the plastic opening tool to disconnect the display cable from its motherboard connector.
Disconnect the display cable by gently pulling it out from its connecting port.
Step 4
- Remove grey metal backing from screen.
Remove grey metal backing from screen.
Step 5
- Flip the tablet so the screen is facing upward, and use the metal spudger to pry apart the screen from the side pieces.
Flip the tablet so the screen is facing upward, and use the metal spudger to pry apart the screen from the side pieces.
Step 6
- Lift and carefully remove the LCD display from the front cover.
Lift and carefully remove the LCD display from the front cover.
Step 7
Charging Port
- Use the Phillips 00 screwdriver head to unscrew the screws to the motherboard.
- Reminder: There should be 8 (3.5 mm) screws to the motherboard.
Use the Phillips 00 screwdriver head to unscrew the screws to the motherboard.
Reminder: There should be 8 (3.5 mm) screws to the motherboard.
Step 8
- Use the Phillips 00 screwdriver head to unscrew the screws to the fan.
- Reminder: There should be 4 (1mm) screws to the fan.
Use the Phillips 00 screwdriver head to unscrew the screws to the fan.
Reminder: There should be 4 (1mm) screws to the fan.
Step 9
- Use the metal spudger to pry off the charging port from the motherboard.
Use the metal spudger to pry off the charging port from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Kelly Moniz
Member since: 10/20/2016
513 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team 6-3, Martin Fall 2016
Member of UMass Dartmouth, Team 6-3, Martin Fall 2016
UMASSD-MARTIN-F16S6G3
3 Members
10 Guides authored
tashiarmarshall - Sep 12, 2018
Reply
I have had no luck getting in touch with anyone in the customer service department.I have left several messages but have not heard from anyone yet. I just need to know how I can get a charge port for my daughters tablet. She had it 6 months before the charge port went out.
