Difficulty

Moderate

Steps

7

Time Required

                          15 minutes

Sections

2

  • Screen
  • 6 steps
  • Battery
  • 1 step

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackLe Pan II

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Insert metal spudger between front and back panel to pry apart.
  • Continue to pry while moving the metal spudger along the crevice to completely separate two panels.
  • Avoid using metal when opening devices, as it can damage or crack the screen.

Insert metal spudger between front and back panel to pry apart.

Continue to pry while moving the metal spudger along the crevice to completely separate two panels.

Avoid using metal when opening devices, as it can damage or crack the screen.

1024

Step 2

  • Use the plastic opening tool to disconnect the flat ribbon cable from the motherboard connector.
  • Disconnect the flat ribbon by gently pulling it out from its connecting port.

Use the plastic opening tool to disconnect the flat ribbon cable from the motherboard connector.

Disconnect the flat ribbon by gently pulling it out from its connecting port.

Step 3

  • Use the plastic opening tool to disconnect the display cable from its motherboard connector.
  • Disconnect the display cable by gently pulling it out from its connecting port.

Use the plastic opening tool to disconnect the display cable from its motherboard connector.

Disconnect the display cable by gently pulling it out from its connecting port.

Step 4

  • Remove grey metal backing from screen.

Remove grey metal backing from screen.

Step 5

  • Flip the tablet so the screen is facing upward, and use the metal spudger to pry apart the screen from the side pieces.

Flip the tablet so the screen is facing upward, and use the metal spudger to pry apart the screen from the side pieces.

Step 6

  • Lift and carefully remove the LCD display from the front cover.

Lift and carefully remove the LCD display from the front cover.

Step 7

              Battery
  • Use the plastic opening tool to push out the wires connecting the battery to the motherboard and put battery aside.

Use the plastic opening tool to push out the wires connecting the battery to the motherboard and put battery aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Kelly Moniz

Member since: 10/20/2016

513 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team 6-3, Martin Fall 2016                        

                                                  Member of UMass Dartmouth, Team 6-3, Martin Fall 2016 



                    UMASSD-MARTIN-F16S6G3                     


                                            3 Members                     


                                            10 Guides authored