Difficulty

Easy

Steps

4

Time Required

                          15 minutes

Sections

1

  • Lasko CD08200 Disassembly
  • 4 steps

Flags

0

  • BackLasko CD08200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Please disconnect the device and let it sit for 10 minutes so any fuses can drain before beginning this guide.

What you need

Step 1

              Lasko CD08200 Disassembly
  • Turn over the device and place it on its head.
  • Remove the four 14mm screws holding the bottom using a TR15 screwdriver.

Turn over the device and place it on its head.

Remove the four 14mm screws holding the bottom using a TR15 screwdriver.

1024

Step 2

  • Remove both 14mm screws from the power cord casing using a Phillips #2 screwdriver.
  • Remove the power cord casing from the device case.

Remove both 14mm screws from the power cord casing using a Phillips #2 screwdriver.

Remove the power cord casing from the device case.

Step 3

  • Cut the sticker on the right side of the device using a Jimmy.
  • Unscrew the four 14mm screws with a Phillips #2 bit on the back of the device.
  • If your screwdriver cannot reach the screw, you can use the metal spudger.
  • Remove the back casing from the device.

Cut the sticker on the right side of the device using a Jimmy.

Unscrew the four 14mm screws with a Phillips #2 bit on the back of the device.

If your screwdriver cannot reach the screw, you can use the metal spudger.

Remove the back casing from the device.

Step 4

  • Remove the four 14mm screws housing the fan using the Phillips #2 screwdriver.
  • Remove the top of the fan housing with the fan attached and place it on the table.

Remove the four 14mm screws housing the fan using the Phillips #2 screwdriver.

Remove the top of the fan housing with the fan attached and place it on the table.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Artur Komissarov

Member since: 01/14/2020

382 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       York University, Team S1-G1, Woodhouse Winter 2020                        

                                                  Member of York University, Team S1-G1, Woodhouse Winter 2020 



                    YORK-WOODHOUSE-W20S1G1                     


                                            3 Members                     


                                            5 Guides authored