Difficulty

Moderate

Steps

8

Time Required

                          15 - 20 minutes

Sections

2

  • Lasko CD08200 Disassembly
  • 4 steps
  • Control Panel
  • 4 steps

Flags

0

  • BackLasko CD08200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

 Before using this guide, make sure to review the troubleshooting page to be sure if replacing the control panel is the correct action to fix your device.

What you need

Step 1

              Lasko CD08200 Disassembly
  • Turn over the device and place it on its head.
  • Remove the four 14mm screws holding the bottom using a TR15 screwdriver.

Turn over the device and place it on its head.

Remove the four 14mm screws holding the bottom using a TR15 screwdriver.

1024

Step 2

  • Remove both 14mm screws from the power cord casing using a Phillips #2 screwdriver.
  • Remove the power cord casing from the device case.

Remove both 14mm screws from the power cord casing using a Phillips #2 screwdriver.

Remove the power cord casing from the device case.

Step 3

  • Cut the sticker on the right side of the device using a Jimmy.
  • Unscrew the four 14mm screws with a Phillips #2 bit on the back of the device.
  • If your screwdriver cannot reach the screw, you can use the metal spudger.
  • Remove the back casing from the device.

Cut the sticker on the right side of the device using a Jimmy.

Unscrew the four 14mm screws with a Phillips #2 bit on the back of the device.

If your screwdriver cannot reach the screw, you can use the metal spudger.

Remove the back casing from the device.

Step 4

  • Remove the four 14mm screws housing the fan using the Phillips #2 screwdriver.
  • Remove the top of the fan housing with the fan attached and place it on the table.

Remove the four 14mm screws housing the fan using the Phillips #2 screwdriver.

Remove the top of the fan housing with the fan attached and place it on the table.

Step 5

              Control Panel
  • Unscrew the four rings using the Phillips #2.
  • Gently remove the fan base from the device.

Unscrew the four rings using the Phillips #2.

Gently remove the fan base from the device.

Step 6

  • Remove the four 14mm screws using the Phillips #2 screwdriver.
  • Gently detach the control panel from the device.

Remove the four 14mm screws using the Phillips #2 screwdriver.

Gently detach the control panel from the device.

Step 7

  • Remove the five 14mm screws using the Phillips #2 screwdriver.
  • Pull apart the motherboard from the panel.

Remove the five 14mm screws using the Phillips #2 screwdriver.

Pull apart the motherboard from the panel.

Step 8

  • Remove the three 10mm screws using the Phillips #2 screwdriver.
  • Pull the button from the panel’s top.
  • During reassembly of the top panel, you must align the LED light with the three windows of the top panel and back panel.

Remove the three 10mm screws using the Phillips #2 screwdriver.

Pull the button from the panel’s top.

During reassembly of the top panel, you must align the LED light with the three windows of the top panel and back panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Najiib Ahmed

Member since: 01/14/2020

161 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       York University, Team S1-G1, Woodhouse Winter 2020                        

                                                  Member of York University, Team S1-G1, Woodhouse Winter 2020 



                    YORK-WOODHOUSE-W20S1G1                     


                                            3 Members                     


                                            5 Guides authored