Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Motor
- 5 steps
Flags
0
BackLasko 2002W
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove cover
- Remove the front cage from the fan, exposing the screws.
Remove the front cage from the fan, exposing the screws.
1024
Step 2
Remove screws
- Remove the 3 screws holding the fan on to the motor housing using a 3/16" philips head screw driver. The length of the screwdriver does not matter.
Remove the 3 screws holding the fan on to the motor housing using a 3/16" philips head screw driver. The length of the screwdriver does not matter.
Step 3
Remove motor screws
- Remove the screws holding the motor onto the fan using the same 3/16" phillips head screwdriver. There are two screws.
- Once removed, remove the metal part the screws were holding to the motor.
Remove the screws holding the motor onto the fan using the same 3/16" phillips head screwdriver. There are two screws.
Once removed, remove the metal part the screws were holding to the motor.
Step 4
Remove old motor.
- Remove the old motor from the fan. No tools are required. The motor can simply be pulled out.
Remove the old motor from the fan. No tools are required. The motor can simply be pulled out.
Step 5
Place new motor in motor housing.
- Now that the old motor is removed, a new motor can be placed in the motor housing.
Now that the old motor is removed, a new motor can be placed in the motor housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 2 other contributors
elsa
Member since: 10/11/2014
355 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 1-39, Donnelly Fall 2014
Member of USF Tampa, Team 1-39, Donnelly Fall 2014
USFT-DONNELLY-F14S1G39
1 Member
1 Guide authored
