Difficulty
Easy
Steps
5
Time Required
15 - 30 minutes
Sections
1
- Blade
- 5 steps
Flags
0
BackFan
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Blade
- Unplug the power cord.
Unplug the power cord.
1024
Step 2
- Wipe off and dust the front and back grill of the fan.
Wipe off and dust the front and back grill of the fan.
Step 3
- Use the Phillips #0 screwdriver to remove four 8.8 mm screws that are marked on the back of the grill.
Use the Phillips #0 screwdriver to remove four 8.8 mm screws that are marked on the back of the grill.
Step 4
- Unlatch the top of the fan to separate the grill and reveal the blade.
Unlatch the top of the fan to separate the grill and reveal the blade.
Step 5
- Grab both sides of the blade and twist counter clockwise to remove it from the base axel attached to the back grill.
Grab both sides of the blade and twist counter clockwise to remove it from the base axel attached to the back grill.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Jewel Robinson
Member since: 03/21/2021
121 Reputation
1 Guide authored
Badges:
2
Team
University of Memphis, Team S52-G16, Kim Spring 2021
Member of University of Memphis, Team S52-G16, Kim Spring 2021
UM-KIM-S21S52G16
1 Member
1 Guide authored
