Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Camera Lens
- 4 steps
Flags
0
BackKyocera Event
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera Lens
- Flip phone over and remove back cover
Flip phone over and remove back cover
1024
Step 2
- Use the screwdriver with the Y0 bit attached to take out the seven 5mm screws that attach the back cover on the phone. Make sure to keep track of these screws, as they are pretty important.
Use the screwdriver with the Y0 bit attached to take out the seven 5mm screws that attach the back cover on the phone. Make sure to keep track of these screws, as they are pretty important.
Step 3
- Next, use the metal spudger to pry at the plastic clips. Be careful to not to lose the power button and volume buttons as they fall out. Remove the plug for the camera flash.
Next, use the metal spudger to pry at the plastic clips. Be careful to not to lose the power button and volume buttons as they fall out. Remove the plug for the camera flash.
Step 4
- Use the spudger to pry the camera lens and remove it from the rear frame. Then you can replace the lens.
Use the spudger to pry the camera lens and remove it from the rear frame. Then you can replace the lens.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
ryan
Member since: 03/16/2015
221 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
Colorado Springs, Team 1-2, May Spring 2015
Member of Colorado Springs, Team 1-2, May Spring 2015
UCCS-MAY-S15S1G2
4 Members
2 Guides authored
