Difficulty

Moderate

Steps

9

Time Required

                          5 - 10 minutes

Sections

1

  • Speakers
  • 9 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackKurio Touch 4S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Speakers
  • Make sure to open the back cover easily using the plastic opening tool.

Make sure to open the back cover easily using the plastic opening tool.

1024

Step 2

  • Remove back cover by prying away from the device.
  • The easiest place to remove the cover is from the bottom and top; try to open it from the right and left sides.
  • Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

Remove back cover by prying away from the device.

The easiest place to remove the cover is from the bottom and top; try to open it from the right and left sides.

Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

Step 3

  • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Phillips #1 Screwdriver
  • After you remove your four 5mm Philips screws, use your plastic opening tool to help you open the plastic cover of your device.

To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Phillips #1 Screwdriver

After you remove your four 5mm Philips screws, use your plastic opening tool to help you open the plastic cover of your device.

Step 4

  • After you remove your four 5mm Philips screws, use your plastic opening tool to help you open the plastic cover of your device.

Step 5

  • Gently remove the plastic cover that is covering the camera.

Gently remove the plastic cover that is covering the camera.

Step 6

  • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

Separate the two halves of your Kurio Touch 4S and lay them besides each other.

Step 7

  • Use the soldering tool to detach the speaker wires.
  • For more information on how to solder the wires Click here

Use the soldering tool to detach the speaker wires.

For more information on how to solder the wires Click here

Step 8

  • Press the speaker in the manner shown so that it comes out of its slot.
  • Be sure not to apply too much force or you can break the back cover.

Press the speaker in the manner shown so that it comes out of its slot.

Be sure not to apply too much force or you can break the back cover.

Step 9

  • Use the Tweezers to remove the speaker from its place.
  • Remove the speaker gently.

Use the Tweezers to remove the speaker from its place.

Remove the speaker gently.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Moin Khan

Member since: 01/21/2015

234 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 6-5, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 6-5, Brown Winter 2015 



                    USFT-BROWN-W15S6G5                     


                                            3 Members                     


                                            10 Guides authored