Difficulty
Difficult
Steps
14
Time Required
30 - 40 minutes
Sections
1
- Screen
- 14 steps
Flags
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
BackKurio Touch 4S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Make sure to open the back cover easily using the plastic opening tool
Make sure to open the back cover easily using the plastic opening tool
1024
Step 2
- Remove back cover by prying away from the Kurio.
- The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.
Remove back cover by prying away from the Kurio.
The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.
Step 3
- To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.
To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.
Step 4
- After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.
- All these screws are identical so don’t worry if you get them out of order.
After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.
All these screws are identical so don’t worry if you get them out of order.
Step 5
- Remove the plastic cover that is covering the camera area.
Remove the plastic cover that is covering the camera area.
Step 6
- Separate the two halves of your Kurio Touch 4S and lay them besides each other.
Separate the two halves of your Kurio Touch 4S and lay them besides each other.
Step 7
- Use Phillips # 1 screw to open the 4 screws on the motherboard.
- Open the screws gently and do not apply too much force as you could damage the motherboard.
Use Phillips # 1 screw to open the 4 screws on the motherboard.
Open the screws gently and do not apply too much force as you could damage the motherboard.
Step 8
- Use the plastic opener to remove the battery.
Use the plastic opener to remove the battery.
Step 9
- Use tweezers to remove the black tape that is attached to the motherboard.
Use tweezers to remove the black tape that is attached to the motherboard.
Step 10
- Detach all the wire that are connected to the motherboard.
- Also remove the camera module and other components that are attached to the motherboard.
- For more information on soldering Click here
Detach all the wire that are connected to the motherboard.
Also remove the camera module and other components that are attached to the motherboard.
For more information on soldering Click here
Step 11
- Remove the motherboard with the help of plastic opener.
- Detach the power plug before you remove the motherboard.
Remove the motherboard with the help of plastic opener.
Detach the power plug before you remove the motherboard.
Step 12
- Use the Plastic opener to remove the screen.
- Do not apply too much pressure as the front cover could be damaged.
Use the Plastic opener to remove the screen.
Do not apply too much pressure as the front cover could be damaged.
Step 13
- Use the soldering tool to remove the wire that is attached to the screen & the motherboard.
Use the soldering tool to remove the wire that is attached to the screen & the motherboard.
Step 14
- Use tweezers to remove the screen from your Kurio Toich 4S.
Use tweezers to remove the screen from your Kurio Toich 4S.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Ali
Member since: 01/21/2015
184 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 6-5, Brown Winter 2015
Member of USF Tampa, Team 6-5, Brown Winter 2015
USFT-BROWN-W15S6G5
3 Members
10 Guides authored
